October 11, 2022—KB5018427 (OS Build 22621.674)

IT admins

Using provisioning packages on Windows 11, version 22H2 (also called Windows 11 2022 Update) might not work as expected. Windows might only be partially configured, and the Out Of Box Experience might not finish or might restart unexpectedly. Provisioning packages are .PPKG files which are used to help configure new devices for use on business or school networks. Provisioning packages which are applied during initial setup are most likely to be impacted by this issue. For more information on provisioning packages, please see Provisioning packages for Windows.

Note Provisioning Windows devices using Windows Autopilot is not affected by this issue.

Windows devices used by consumers in their home or small offices are not likely to be affected by this issue.

This issue is addressed in KB5020044.

IT admins

Copying large multiple gigabyte (GB) files might take longer than expected to finish on Windows 11, version 22H2. You are more likely to experience this issue copying files to Windows 11, version 22H2 from a network share via Server Message Block (SMB) but local file copy might also be affected.Windows devices used by consumers in their home or small offices are not likely to be affected by this issue.

This issue is addressed in KB5022913. 

All users

On October 5, 2022, the Jordanian government made an official announcement ending the winter-time Daylight Saving Time (DST) time zone change. Starting at 12:00 a.m. Friday, October 28, 2022, the official time will not advance by an hour and will permanently shift to the UTC + 3 time zone. 

The impact of this change is as follows: 

1. Clocks will not be advanced by an hour at 12:00 a.m. on October 28, 2022 for the Jordan time zone.

2. The Jordan time zone will permanently shift to the UTC + 3 time zone.

Symptoms if no update is installed and the workaround is not used on devices in the Jordan time zone on October 28, 2022 or later:

• Time shown in Windows and apps will not be correct.

• Apps and cloud services which use date and time for integral functions, such as Microsoft Teams and Microsoft Outlook, notifications and scheduling of meetings might be 60 minutes off.

• Automation using date and time, such as Scheduled tasks, might not run at the expected time.

• Timestamp on transactions, files, and logs will be 60 minutes off.

• Operations that rely on time-dependent protocols such as Kerberos might cause authentication failures when attempting to logon or access resources.

• Windows devices and apps outside of Jordan might also be affected if they are connecting to servers or devices in Jordan or if they are scheduling or attending meetings taking place in Jordan from another location or time zone. Windows devices outside of Jordan should not use the workaround, as it would change their local time on the device.

This issue is addressed in KB5018496. This update will not install automatically. To apply this update, you can check for updates and select the optional preview to download and install.

If you cannot install this update, you can mitigate this issue on devices in Jordan by doing either of the following on October 28, 2022:

• Select the Windows logo key, type "Date and time", and select Date and time settings. From the Date & time settings page, toggle Adjust for daylight saving time automatically to Off.

• Go to Control Panel > Clock and Region > Date and Time > Change time zone and uncheck the option for “Automatically adjust clock for Daylight Saving Time”.

Important: We recommend using ONLY the above workaround to mitigate the issue with time created by the new Daylight Savings Time in Jordan. We do NOT recommend using any other workaround, as they can create inconsistent results and might create serious issues if done incorrectly.

IT admins

After this and later updates are installed, domain join operations might be unsuccessful and error "0xaac (2732): NERR_AccountReuseBlockedByPolicy" occurs. Additionally, text stating "An account with the same name exists in Active Directory. Re-using the account was blocked by security policy" might be displayed.

Affected scenarios include some domain join or re-imaging operations where a computer account was created or pre-staged by a different identity than the identity used to join or re-join the computer to the domain.

For more information about this issue, see KB5020276 - Netjoin: Domain join hardening changes.

Note Consumer Desktop editions of Windows are unlikely to experience this issue.

We have added guidance to KB5020276 and are evaluating whether optimizations can be made in a future Windows Update. This guidance will be updated as soon as those changes are released.

IT admins

After you install this or later updates, you might be unable to reconnect to Direct Access after temporarily losing network connectivity or transitioning between Wi-Fi networks or access points.

Note This issue should not affect other remote access solutions such as VPN (sometimes called Remote Access Server or RAS) and Always On VPN (AOVPN).

Windows devices used at home by consumers or devices in organizations which are not using Direct Access to remotely access the organization's network resources are not affected.

This issue is addressed in updates released December 13, 2022 (KB5021255) and later. We recommend you install the latest security update for your device. It contains important improvements and issue resolutions, including this one. If you install an update released December 13, 2022 (KB5021255) or later, you do not need to use a Known Issue Rollback (KIR) or a special Group Policy to address this issue. If you are using an update released before December 13, 2022, and have this issue, you can address it by installing and configuring the special Group Policy listed below.The special Group Policy can be found in Computer Configuration -> Administrative Templates -> <Group Policy name listed below>.

For information on deploying and configuring these special Group Policy, please see How to use Group Policy to deploy a Known Issue Rollback.

Group Policy downloads with Group Policy name:

• Download for Windows 11, version 22H2 - KB5018427 221029_091533 Known Issue Rollback

• Download for Windows 11, version 21H2 - KB5018483 220927_043051 Known Issue Rollback

• Download for Windows Server 2022 - KB5018485 220927_043049 Known Issue Rollback

• Download for Windows 10, version 22H2; Windows 10, version 21H2; Windows 10, version 21H1; Windows 10, version 20H2 - KB5018482 220927_043047 Known Issue Rollback

Important You must install and configure the Group Policy for your version of Windows to resolve this issue.

All users

Certain applications might stop responding when you use keyboard shortcuts to turn on, turn off, or change the input mode of the Input Method Editor (IME).

Examples of actions that might cause this issue:

• For Japanese:

  • Using the Hankaku/Zenkaku (半角 / 全角) key on a Japanese keyboard

  • Using the default keyboard shortcut: holding down the Alt key and pressing ~ (tilde)

• For Chinese:

  • Using the default keyboard shortcut: holding down the Control key and pressing Space

• For Korean:

  • Using the default keyboard shortcut: pressing the right Alt key

This issue is observed for applications that load certain components of the Text Services Framework (TSF). Applications that don't load these components should not experience this issue.

This issue is addressed in KB5020044.

IT admins

After installing this update, some types of SSL (Secure Sockets Layer) and TLS (Transport Layer Security) connections might have handshake failures.

Note for developers The affected connections are likely to be sending multiple frames within a single input buffer, specifically one or more complete records with a partial record that is less than 5 bytes all sent in a single buffer. When this issue is encountered, your app will receive SEC_E_ILLEGAL_MESSAGE when the connection fails.

This issue is addressed in KB5018496. We recommend you install the latest security update for your device.

Note KB5018496 will not install automatically. To apply this update, you can check for updates and select the optional preview to download and install.

IT admins

You might have intermittent issues saving, copying, or attaching files using 32-bit apps, which are large address aware and using the CopyFile API. Windows devices are more likely to be affected by this issue when using some commercial or enterprise security software that uses extended file attributes. Microsoft Office apps, such as Microsoft Word or Microsoft Excel are only affected when using 32-bit versions and you might receive the error, "Document not saved."

This issue is unlikely to be experienced by consumers using Windows devices in their home or on non-managed commercial devices. Apps are not affected by this issue if they are 64-bit or 32-bit and NOT large address aware.

This issue is addressed in KB5027231.

Release Channel

Available

Next Step

Windows Update and Microsoft Update

Yes

None. This update will be downloaded and installed automatically from Windows Update.

Windows Update for Business

Yes

None. This update will be downloaded and installed automatically from Windows Update in accordance with configured policies.

Microsoft Update Catalog

Yes

To get the standalone package for this update, go to the Microsoft Update Catalog website.

Windows Server Update Services (WSUS)

Yes

This update will automatically sync with WSUS if you configure Products and Classifications as follows:

Product: Windows 11

Classification: Security Updates