Release Date:

14/09/2021

Version:

Monthly Rollup

Summary

Learn more about this security update, including improvements and fixes, any known issues, and how to get the update.  

Important: Windows 7 and Windows Server 2008 R2 have reached the end of mainstream support and are now in extended support. Starting in July 2020, there will no longer be optional, non-security releases (known as "C" releases) for this operating system. Operating systems in extended support have only cumulative monthly security updates (known as the "B" or Update Tuesday release). Verify that you have installed the required updates listed in the How to get this update section before installing this update.  For information about the various types of Windows updates, such as critical, security, driver, service packs, and so on, please see the following article. To view other notes and messages, see the Windows 7 and Windows Server 2008 R2 update history home page.

Improvements and fixes

This security update includes improvements and fixes that were a part of update KB5005088 (released August 10, 2021) and addresses the following issues:

  • Addresses an issue in which a driver might not install if the driver is signed with more than one code sign signatures.

  • This update also contains miscellaneous security improvements to internal OS functionality.

For more information about the resolved security vulnerabilities, please refer to the new Security Update Guide website.

Known issues in this update

Symptom 

Workaround 

After installing this update and restarting your device, you might receive the error, "Failure to configure Windows updates. Reverting Changes. Do not turn off your computer", and the update might show as Failed in Update History.

This is expected in the following circumstances:

  • If you are installing this update on a device that is running an edition that is not supported for ESU. For a complete list of which editions are supported, see KB4497181.

  • If you do not have an ESU MAK add-on key installed and activated.

If you have purchased an ESU key and have encountered this issue, please verify you have applied all prerequisites and that your key is activated. For information on activation, please see this blog post. For information on the prerequisites, see the How to get this update section of this article.

Certain operations, such as rename, that you perform on files or folders that are on a Cluster Shared Volume (CSV) may fail with the error, "STATUS_BAD_IMPERSONATION_LEVEL (0xC00000A5)". This occurs when you perform the operation on a CSV owner node from a process that doesn’t have administrator privilege.

Do one of the following: 

  • Perform the operation from a process that has administrator privilege.

  • Perform the operation from a node that doesn’t have CSV ownership.

Microsoft is working on a resolution and will provide an update in an upcoming release. 

After installing this update, devices which attempt to connect to a network printer for the first time might fail to download and install the necessary printer drivers. Devices which had connected to and installed the printer prior to the installation of this update are unaffected and operations to that printer will succeed as usual.

This issue has been observed in devices which access printers via a print server using HTTP connections. When a client connects to the server to install the printer, a directory mismatch occurs, which causes the installer files to generate incorrectly. As a result, the drivers may not download.

Note The printer connection methods described in this issue are not commonly used by devices designed for home use. The printing environments affected by this issue are more commonly found in enterprises and organizations.

This issue is resolved in KB5006743.

After installing this update on a print server, printing properties defined on that server might not be correctly provided to clients. Note this issue is specific to print servers and does not impact standard network printing. This issue will not cause printing operations to fail, however, custom settings defined on the server – for example, duplex print settings – will not be applied automatically, and clients will print with default settings only.

This issue results from an improper building of the data file which contains the printer properties. Clients which receive this data file will not be able to use the file content and will instead proceed with default printing settings. Clients who have previously received the settings package prior to the installation of this update are unaffected. Servers which use default print settings and have no custom settings to provide to clients are unaffected.

Note The printer connection methods described in this issue are not commonly used by devices designed for home use. The printing environments affected by this issue are more commonly found in enterprises and organizations.

This issue is resolved in KB5007236.

After installing this update, you might receive a prompt for administrative credentials every time you attempt to print in environments in which the print server and print client are in different times zones.

 Note The affected environments described in this issue are not commonly used by devices designed for home use. The printing environments affected by this issue are more commonly found in enterprises and organizations.

This issue was resolved in KB5006743. If after installing KB5006743 you still receive the prompt every time you print, see Q1 in the "Frequently ask questions" section of KB5005652—Manage new Point and Print default driver installation behavior (CVE-2021-34481).

How to get this update

Before installing this update

IMPORTANT Customers who have purchased the Extended Security Update (ESU) for on-premises versions of these operating systems must follow the procedures in KB4522133 to continue receiving security updates after extended support ends. Extended support ends as follows:

  • For Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1, extended support ends on January 14, 2020.

  • For Windows Embedded Standard 7, extended support ends on October 13, 2020.

For more information about ESU and which editions are supported, see KB4497181.

Note For Windows Embedded Standard 7, Windows Management Instrumentation (WMI) must be enabled to get updates from Windows Update or Windows Server Update Services.

Prerequisite:

You must install the updates listed below and restart your device before installing the latest Rollup. Installing these updates improves the reliability of the update process and mitigates potential issues while installing the Rollup and applying Microsoft security fixes.

  1. The March 12, 2019 servicing stack update (SSU) (KB4490628). To get the standalone package for this SSU, search for it in the Microsoft Update Catalog. This update is required to install updates that are only SHA-2 signed.

  2. The latest SHA-2 update (KB4474419) released September 10, 2019. If you are using Windows Update, the latest SHA-2 update will be offered to you automatically. This update is required to install updates that are only SHA-2 signed. For more information on SHA-2 updates, see 2019 SHA-2 Code Signing Support requirement for Windows and WSUS.

  3. For Windows Thin PC, you must have the August 11, 2020 SSU (KB4570673) or a later SSU installed to make sure you continue to get the extended security updates starting with the October 13, 2020 updates.

  4. To get this security update, you must reinstall the "Extended Security Updates (ESU) Licensing Preparation Package" (KB4538483) or the "Update for the Extended Security Updates (ESU) Licensing Preparation Package" (KB4575903) even if you previously installed the ESU key. The ESU licensing preparation package will be offered to you from WSUS. To get the standalone package for ESU licensing preparation package, search for it in the Microsoft Update Catalog.

After you install the items above, we strongly recommend that you install the latest SSU (KB5004378). If you are using Windows Update, the latest SSU will be offered to you automatically if you are an ESU customer. To get the standalone package for the latest SSU, search for it in the Microsoft Update Catalog. For general information about SSUs, see Servicing stack updates and Servicing Stack Updates (SSU): Frequently Asked Questions.

Install this update

Release Channel

Available

Next Step

Windows Update and Microsoft Update

Yes

None. This update will be downloaded and installed automatically from Windows Update if you are an ESU customer.

Microsoft Update Catalog

Yes

To get the standalone package for this update, go to the Microsoft Update Catalog website.

Windows Server Update Services (WSUS)

Yes

This update will automatically sync with WSUS if you configure Products and Classifications as follows:

Product:  Windows 7 Service Pack 1, Windows Server 2008 R2 Service Pack 1, Windows Embedded Standard 7 Service Pack 1, Windows Embedded POSReady 7, Windows Thin PC

Classification: Security Updates

File information

For a list of the files that are provided in this update, download the file information for update 5005633.

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.